Fancy Trim Foot

DescriptionMachine Compatibility: 1, 2, 3, 4, 5, 6, 7, 8, 9 Not suitable for: EMERALD 122, 118, 116 machines, EDEN ROSE 250M, TRIBUTE 140M and 145M Not sure which group your machine belongs to? Check out the Machine compatibility chart Decorate your project with glittery sequins by using the Fancy Trim Foot. This foot will easily guide the sequins through a groove at the front of the foot, while your sewing machine stitches your fancy trim in place invisible. Only circle-round sequins can be used. How to use: Thread with invisible thread on top and regular sewing thread in the bobbin. Snap-on the Fancy Trim Foot and select a Hand Look Appliqué Stitch. Adjust the stitch length to 4.5 and the width according to the width of your sequins. Make sure to use a Tear-Away stabilizer underneath your fabric. Slide the sequins into the groove at the front of the presser foot. Make sure you have pulled a piece of the sequin trim under the foot and through to the back of the foot before you start to sew. Snap-on the foot. Start sewing on a scrap of your fabric, since different fabrics behave in different ways. Sew slowly to prevent sewing through the sequins.